Apartment climate control in new buildings

Construction materials

In the process of designing new housing, special attention is paid to the use of up-to-date construction materials with low thermal conductivity. This significantly reduces the need for air conditioners and heating devices, which, in turn, saves energy. Among the most commonly used materials, you should pay attention to the following:

• Wall blocks made of cellular concrete: aerated concrete, foam concrete. Such blocks have a density of 400-600 kg/m3, which is significantly lower than the density of bricks (1200-1800 kg/m3). This makes them the best solution for thermal insulation.
• Mineral wool. A popular material used for thermal insulation of floors, walls or roofs of buildings.
• Styrofoam. A cheap and affordable thermal insulation material, but its durability is lower compared to mineral wool.
• Extruded polystyrene foam. It has a high density and strength, and is used to insulate basements, foundations, and facades.
• Thermal insulation plasters. They are applied to the walls from the outside or inside, and can reduce the wall thickness.

It is important to choose the right thickness of thermal insulation. It depends on the climate, wall type, and other factors. It is better to entrust the calculation of the insulation thickness to specialists.

Apartment climate control is a very important issue that is given special attention during the construction of new buildings in Kyiv and Lviv. For example, the Sherlock Holmes Residential Complex in Lviv was built with cutting-edge process solutions in mind, which makes such housing more comfortable for everyday living and economical at the same time.

Air conditioning in a new building

Modern new buildings are constructed in such a way as to provide the maximum level of comfort and energy efficiency. That is why the issue of air conditioning is particularly relevant. Creating a comfortable indoor microclimate throughout the year guarantees the maximum level of convenience for each homeowner. The following parameters are worth highlighting:

• Planning. It is important to think in advance about the placement of routes and outdoor air conditioning units so that they do not spoil the facade of the house.
• Energy efficiency. It is recommended to choose air conditioners with a high energy efficiency class to save energy.
• Noise insulation. It is important to pay attention to the noise level of the air conditioner so that it does not interfere with your rest.
• Design. Air conditioners should be in harmony with the interior of the apartment.

New buildings use up-to-date split systems consisting of two functional units. Centralized air conditioning systems can also be used to supply several apartments at once.

Ventilation in a residential building

Ventilation in a residential building is one of the most important systems, as it provides fresh air and removes exhaust air. Properly planned ventilation will allow you to live in a comfortable and healthy microclimate. There are two types of ventilation: natural and mechanical.

Natural ventilation uses the difference in temperature and air pressure. This type of ventilation does not require electricity, but it cannot always provide sufficient air exchange.

For mechanical ventilation, special devices are used to move air flows. This type is more efficient but requires electricity.

The main stages of designing a ventilation system in a residential building include the following:

• Placement of ventilation ducts. Ventilation ducts in residential buildings should be laid in such a way as not to clutter up the living space.
• Selection of fans. Fans should be selected according to power and noise characteristics.
• Installation of the ventilation system. The ventilation system should be installed by qualified specialists.

It is recommended to plan the ventilation system at the initial stages of construction. This will help ensure the most comfortable living conditions in the future.

Heating and hot water

When considering the climate control of apartments in new buildings, you should pay attention to heating and hot water supply. The following main types of heating are commonly used:

• Centralized. Heat is supplied by pipes from a boiler room. This is the most common type of heating, but it does not always allow you to regulate the temperature in the apartment.
• Individual. An autonomous boiler is installed in the apartment, which allows you to adjust the temperature and heating time.

Centralized and individual systems can also be used to provide hot water. Individual systems are more common, as they provide owners with full control over the supply of hot water.

Together with insulation, you can save on heating and optimize all costs. This is a good opportunity for owners of new apartments to get the most comfortable living conditions.

Doors

Door systems play an important role in apartment climate control and energy conservation. They help to:

• Keep you warm in winter. High-quality doors with a good seal will keep the heat in the apartment, which will reduce the need for heating.
• Keep you cool in summer. Doors with thermal insulation will keep the apartment cool, which will reduce the need for air conditioning.
• Reduce noise. Doors with sound insulation minimize external noise, so your apartment will be quieter.

Doors should be made of high-quality and durable materials. It is also very important to pay attention to thermal insulation properties. Design plays an important role.

There are various options for housing climate control that contribute to energy efficiency and economy. The developer Real Estate Corporation RIEL uses cutting-edge technologies to make each building comfortable for its owners.